Shimano Titanium Bolt Kit Guide: XTR, Deore XT and Di2 Upgrades
Small bolts, Big upgrade
Grade 5 titanium (Ti-6Al-4V) bolt kits for Shimano XTR, Deore XT and 12-speed Di2. Lighter, corrosion-proof, and finished in colors that make the details of your bike worth a second look.
Great components deserve great details
Reliable shifting and confident braking are what carry you up and over every mountain trail. That is why so many mountain bikers trust Shimano: solid braking feel, smooth and precise shifting, and steady performance on the climb, in the forest and on rough, punishing descents.
If you want to add a little more refinement on top of that foundation, the small hardware is the place to start. S-PARTS titanium bolt kits are ready for the Shimano parts you ride every day.
Titanium bolt kit for Shimano XTR M9200 / M9220 disc brakes
Shimano’s first fully wireless mountain groupset is a complete performance package. The redesigned brakes give you smooth power at the start of the lever stroke, strong stopping force when you pull deep, and resistance to heat fade on long descents.
Where the titanium goes: XTR lever
What the kit replaces on the lever side
-
Lever clamp bolt
Holds the lever on the handlebar -
Bleed port bolt
Seals the fluid fill port -
Reach adjustment bolt
Sets lever reach to your hand -
Hose bolt
Connects the hose at the lever
Where the titanium goes: XTR caliper
What the kit replaces on the caliper side
-
Caliper mounting bolts and washers
Fixes the caliper to the frame or fork -
Bleed screw
Seals the caliper bleed port -
Brake pad retaining pin
Keeps the pads in place -
Caliper bridge bolts
Join the two halves of the caliper
Grade 5 titanium alloy resists corrosion and does not rust easily. The key points on your disc brakes can take forest mud, wet trails and humid weather, and still look new after a long time in use.
Titanium Disc Brake Bolt Kit for Shimano XTR M9220
- Grade 5 titanium, Ti-6Al-4V
- 26-piece kit for the XTR M9220 lever and caliper
- Multiple colors available
Titanium bolt kit for Shimano Deore XT M8200 / M8220 disc brakes
XT is the all-rounder mountain bikers trust. It sits below the flagship XTR on price, yet it shares the same technology and the same feel.
Where the titanium goes: XT lever
Shared by M8200 and M8220 brakes
-
Lever clamp bolt
Holds the lever on the handlebar -
Bleed port bolt
Seals the fluid fill port -
Reach adjustment bolt
Sets lever reach to your hand -
Hose bolt
Connects the hose at the lever
M8200 2-piston caliper
Body bolts, mounting hardware and pad pin
-
Caliper body bolts (A and B)
Fasten the caliper body -
Mounting bolts and washers
Fix the caliper to the frame or fork -
Bleed screw
Seals the caliper bleed port -
Brake pad retaining pin
Keeps the pads in place -
Caliper bridge bolts
Join the two halves of the caliper
M8220 4-piston caliper
Same layout, built for heavier-duty braking
-
Caliper body bolts (A and B)
Fasten the caliper body -
Mounting bolts and washers
Fix the caliper to the frame or fork -
Brake pad retaining pin
Keeps the pads in place -
Caliper bridge bolts
Join the two halves of the caliper
Precision-cut threads mesh tightly without slipping, so every bolt installs and aligns smoothly. You keep the structural strength you need and give your brake system a more refined feel.
Grade 5 Titanium Bolt Kit for Shimano Deore XT M8200 / M8220
- Grade 5 titanium, Ti-6Al-4V
- Covers the lever, plus 2-piston M8200 and 4-piston M8220 calipers
- Multiple colors available
Half the weight of steel bolts. Zero rust. Every color you can imagine.
Titanium bolts for Shimano M8250 / M9250 wireless Di2 drivetrains
Both groupsets run on Shimano’s 12-speed wireless Di2 platform, with the same core technology. If you chase low weight and race performance, choose XTR M9250. If you want the best value, choose Deore XT M8250. Either way, you can leave the finishing touches to S-PARTS titanium bolts.
Where the titanium goes: drivetrain
Shifter, rear derailleur and crankset
-
Shifter clamp bolt
Secures the shifter to the handlebar -
Shifter button fixing nut (×2)
Holds the shifter buttons in place -
Shifter top cover bolt
Fastens the shifter's top cover -
Rear derailleur positioning plate
Locates the derailleur at its mounting point -
Rear derailleur pivot axle
The main pivot of the derailleur mount -
Rear derailleur link pin
Acts as a stop that limits movement -
Limit screws (×2)
Set the travel range of the derailleur -
B-tension screw
Adjusts the derailleur's distance to the cassette -
Decorative cover bolt
Fastens the derailleur's decorative cover -
Guide pulley bolt
Holds the upper guide pulley -
Tension pulley bolt
Holds the lower tension pulley -
Crank cover
Preloads the crank arm on the spindle -
Crank fixing bolt (×2)
Locks the crank arm in place -
Pedal washer (×2)
Sits between the crank arm and the pedal
Installation note: the rear derailleur pivot axle comes with a rubber O-ring. Use it to replace the original factory snap ring, and always follow Shimano’s torque values.
A titanium swap takes the look of your rear derailleur much further, with plenty of colors to choose from, including new colorways. Your bike looks sharper and performs the same.
Titanium Bolt Kit for Shimano XT/XTR M8200 M8250 M9200 M9250
- Grade 5 titanium, Ti-6Al-4V
- Complete 18-piece kit for the shifter, rear derailleur and crankset, or buy individual parts
- Fits XT M8200 / M8250 and XTR M9200 / M9250, in 10 colors
One kit, a whole palette of titanium finishes
Choose a finish that matches your frame, your components or your mood: gold, copper, silver, blue, green, or the rainbow oil-slick that titanium is famous for. Every kit is available in stock now.
Which kit fits your Shimano group?
Match your brake or drivetrain model to the kit below. Each product page lists the full contents and available colors.
| Your Shimano parts | Kit | Material | Link |
|---|---|---|---|
| XTR M9200 / M9220 disc brakes | Titanium Disc Brake Bolt Kit for Shimano XTR M9220 (26 pcs) | Grade 5 titanium, Ti-6Al-4V | View XTR M9220 kit |
| Deore XT M8200 (2-piston) / M8220 (4-piston) disc brakes | Grade 5 Titanium Bolt Kit for Shimano Deore XT M8200 / M8220 | Grade 5 titanium, Ti-6Al-4V | View Deore XT kit |
| XT M8200 / M8250 and XTR M9200 / M9250 drivetrain (shifter, rear derailleur, crankset) | Titanium Bolt Kit for Shimano XT/XTR M8200 M8250 M9200 M9250 (18-piece kit or individual parts) | Grade 5 titanium, Ti-6Al-4V | View drivetrain kit |
Frequently asked questions
What is Grade 5 titanium (Ti-6Al-4V)?
Grade 5 titanium, also written Ti-6Al-4V, is a titanium alloy with about 6% aluminum and 4% vanadium. It is the most widely used titanium alloy, valued for its high strength-to-weight ratio and corrosion resistance, which is why it is the standard choice for performance bike hardware.
Will titanium bolts rust on my brakes?
No. Titanium alloy is highly corrosion resistant, so brake bolts can handle mud, rain and humid conditions and keep their finish over time.
Which S-PARTS kit fits my Shimano parts?
Use the XTR M9220 kit for Shimano XTR M9200/M9220 brakes, the Deore XT kit for Shimano Deore XT M8200/M8220 brakes (both the 2-piston M8200 and 4-piston M8220 calipers), and the drivetrain kit for the shifter, rear derailleur and crankset on Shimano XT M8200/M8250 and XTR M9200/M9250.
Do the bolts come in different colors?
Yes. S-PARTS kits are offered in several finishes. The drivetrain kit, for example, comes in ten colors: gold, rainbow, titanium, black, blue, green, purple, candy, indigo and copper. Check each product page for the colors available for your kit.
Can I buy individual parts instead of the whole kit?
Yes, for the drivetrain kit. Its product page lets you choose the complete 18-piece kit or buy individual parts separately, such as the shifter clamp bolt, limit screws or crank cover.
Can I install the bolts myself?
Most riders can, using the correct hex or Torx key and Shimano’s specified torque values. If you are not confident working on hydraulic brakes or electronic shifting, have a professional mechanic do the install.
Ready to upgrade the details?
Pick your Shimano brake or drivetrain model, choose your color, and make your bike lighter, cleaner and more distinctly yours.
