S-PARTS
Titanium Drivetrain Bolt Kit & Individual Parts for SRAM RED XPLR 13-Speed
Titanium Drivetrain Bolt Kit & Individual Parts for SRAM RED XPLR 13-Speed
Couldn't load pickup availability
Product Description
Titanium Drivetrain Hardware for SRAM RED XPLR 13-Speed
Upgrade your SRAM RED XPLR 13-speed shifting and drivetrain components with lightweight, high-strength Grade 5 titanium hardware. Choose the complete kit, or buy only the parts you need for the rear derailleur, crankset and road shifters.
Specifications
Material: Grade 5 titanium alloy (Ti-6Al-4V) | Average tensile strength: over 1,050 MPa
| Part | Size | Weight | Tool | Torque |
|---|---|---|---|---|
| Complete Kit (all parts below) | - | 48.7 g per kit | - | - |
| Individual parts (sold separately) | ||||
| Rear Derailleur Pivot Bolt | M18 × 28 mm | 19.4 g each | 8 mm hex | 25 Nm |
| Guide / Tension Pulley Bolts | M5 × 12.5 mm | 0.92 g each | 2.5 mm hex | - |
| Rear Derailleur Linkage Bolts | M3 × 8 mm | 0.4 g each | T10 Torx | - |
| DUB Crank Cap Set (cap + bolt) | 1 set | 13.6 g per set | Park Tool SPA-2 (or equivalent) | Main bolt (right-hand thread): 50 Nm Outer cap screw (left-hand thread): 3 Nm |
| Chainring Bolts (8 pcs) | M4 × 8.5 mm | 4.9 g per set | T20 Torx | - |
| Pedal Washer | M14, Ø20 mm | 0.64 g each | - | - |
| Road Shifter T-Bolt | M6 × 11.5 mm | 1.9 g each | - | - |
| Road Shifter Nut | M6 × 8 mm Head Ø10 mm, height 4.5 mm |
1.26 g each | 5 mm hex | - |
| Road Shifter Stepped Washer | M8 × 1.5 mm OD 14 mm, thickness 1.5 mm |
0.46 g each | - | - |
Complete Kit Includes
- Rear derailleur pivot bolt × 1
- Rear derailleur guide pulley bolt × 1
- Rear derailleur tension pulley bolt × 1
- Rear derailleur linkage bolts × 2
- DUB crank cap set × 1
- Chainring bolts × 8
- Pedal washers × 2
- Shifter clamp bolt sets × 2 (bolt + nut + washer)
Where These Parts Fit



Please Note
- Candy: Because of the coloring process, the finish has a flowing look and the color pattern varies from piece to piece.
- White lines on the threads: Some bolts show white lines on the threads. This is a normal effect of the coloring process and is safe to use.
- Hardware only: This listing includes S-PARTS titanium fasteners and washers only. Cranksets, derailleurs and shifters are not included.
- Torque: Use the torque values listed above for those parts. For all other fasteners, tighten to the torque specified on the original part or in your SRAM manual.
Colors & Finishes
Available colors: Gold, Rainbow, Titanium, Black, Blue, Green, Purple, Candy, Indigo, Copper
Gold, Rainbow, Black, Blue, Copper – PVD nitride coating
A dense nitride layer improves surface hardness and impact resistance. The color sits deep in the surface layer and won't fade in normal use, so it stands up to rain and mud.
Green, Purple, Candy, Indigo – Anodized
Anodizing builds an oxide layer of varying thickness on the titanium, adding surface hardness and corrosion resistance. The colors come from light interference within this layer, with no dye used.
High Strength-to-Weight Ratio
- Lab-tested material: Sourced through a civil aerospace metals supply chain in Xi'an and lab-tested to S-PARTS standards. Average tensile strength exceeds 1,050 MPa, well above the industry minimum of 895 MPa.
- Steel-grade performance at half the weight: Comparable to Grade 10.9 steel fasteners in overall mechanical properties, at approximately half the weight.
- Hot-forged heads: Formed in custom S-PARTS dies at 650 °C. Each die is used no more than 300 times to keep dimensions accurate.
- Precision machining: Fastener bodies are machined in S-PARTS' own factory on high-precision CNC machines, with micron-level tolerance control for a precise thread fit.
Installed on the Bike

Share
